Add Scanning Capabilites to Your Huntron Tracker Model 30 System

Adding a
Huntron^® Scanner to your Tracker Model 30 system
lets you access components using standard DIP clips and cables, custom cables to
PCB connectors or interface to a bed-of-nails.
You can compare one component
with another in real-time (64 pins max.) or use your PC to automate testing and
scan up to 128 pins.
Huntron Scanners can be used with a Huntron Access
Prober to provide Common line connections while the Prober is probing a PCB.
This method gives you up to 128 selectable Commons to use. For example, you can
connect the Scanner to a connector on a PCB mounted in the Prober using a common
ribbon style cable. While the Prober is probing, any one of the lines on the
connected ribbon cable can be selected as the Common reference. This would
provide you true point-to-point testing capabilities.
Note: The
ProTrack Scanner will be replaced by the Scanner II and/or the Scanner 31S
effective 1/1/2008. This applies to commercial sales
only.


Scanner
II and Scaner 31S users may want to consider these Optional Accessories to enhance
their test capabilities.

Highlights:Desing
By kuzey....

• The Scanner II and Scanner 31S accessories add scanning capability
  to the Tracker Model 30
• All Scanners have a minimum 64 pin capability
• The Scanner II can scan up to 128 pins when the A and B channels
  are combined
• The Scanner 31S use standard IDC style connectors
• The Scanner II uses the common SCSI-2 (68 pin) style connectors
• Up to 8 Scanner IIs can be “daisy-chained” to increase the
  available number of test pins

Selecting Accessories for your Scanner
II
The Scanner II accessories for interfacing to your printed circuit
board come "ala carte". This means that you select the accessories you want
included with your Scanner. Choose from SMT or through-hole style DIP clip and
cable kits (Scanner Adapter required with Scanner II) or a mutli-pin breakout
cable. Details on these accessories are provided on this
page